История цены

*Внимание! Указанная стоимость US $306.72 - 324.72 уже могла изменится. Проверьте цену на текущий момент - >

---

Аналогичные товары

12475.19 - VEVOR U-образная машинка для стрижки колбасы ручной производитель о... Подробнее...

31994.71 - 25.4mm Large Font Portable Hand Jet Handheld Thermal Inkjet Printer... Подробнее...

12357.56 - Машинка для стрижки волос VEVOR U-образная машинка 8000 шт. зажимов... Подробнее...

765.9 - Автоматический герметизирующий аппарат для электромагнитной индукци... Подробнее...

13276.63 - VEVOR B19 ручная пневматическая обвязочная машина 3500N максимально... Подробнее...

55502.34 - 550 блистерная упаковочная машина высокоскоростная автоматическая Б... Подробнее...

Характеристики

Notice :

when the parcel arrived to your customs  ,please pay the tax and pick up the parcel 

,we are not responsible for  any customs duty or import tax  

   if your place is remote ,then need to pay 38usd .

 

 

Specification:

Name: SF-150W automatic film sealing machine
Voltage: 110V / 220V
Power: 500W
Body material: stainless steel
Sealing width: 0.6-1.5CM
Sealing thickness: less than 35 wires
Seal length: unlimited
Temperature control range: 0-300 degrees
Delivery weight: less than or equal to 5kg
Printing type: stamp
Operation type: intelligent control panel
Temperature control type: intelligent temperature control
Sealing speed: 0-24 m / min
Packing size: 86*41*37.5cm
Weight: 22KG
Accessories: date wheel, fuse, toothed belt, insulated tape, screwdriver, power cord

Working principle
1. This machine is composed of parts such as frame, speed reduction mechanism, transmission
and conveying printing device;
2. When the power is turned on, the electric heating element generates heat, so that the upper and
lower heating blocks are rapidly heated and the temperature and speed of the required sealing
material are controlled by the temperature controller and the speed regulating device;
3. The plastic packaging bag is conveyed by the conveyor belt, and the packaging bag and the
sealing portion are fed between the two sealing pockets in operation. The sealing portion of the
plastic bag is fed into the heating zone under the clamping of the upper and lower sealing pockets,
and the sealing pocket is heated. The zone is pressed by the two heating blocks to bond the plastic
film after being heated, and then sent to the cooling zone for cooling under the clamping of the
sealing pocket.

Note:
This machine is equipped with an embossing wheel and a date wheel. If you need a large stripe wheel

or flattening wheel, you can contact our customer service to purchase. Thank you

Picture showing :

Фото